Enjoy complimentary customisation on priority with our Enterprise License!
The solenoid valves market size is forecast to increase by USD 1.43 billion at a CAGR of 4.7% between 2024 and 2029.
Explore in-depth regional segment analysis with market size data - historical 2019-2023 and forecasts 2025-2029 - in the full report.
Request Free Sample
The solenoid valve market demonstrates continuous evolution, driven by advancements in system integration, valve spool design, and electrical interface. Industrial automation sectors, particularly in manufacturing and energy, are primary consumers, with electrical solenoid valves accounting for a significant market share. Valve body materials, leak detection, and temperature sensors are essential considerations in valve selection and valve actuator sizing. Corrosion resistance and power consumption are critical factors influencing solenoid valve circuit design. Remote control and application-specific valves enable enhanced process control and efficiency. For instance, the adoption of solenoid valves in fluid power systems has led to a 15% increase in sales in the past five years.
The industry anticipates a 7% annual growth rate, driven by the development of high-flow valves, diagnostic testing, and failure analysis techniques. Additionally, the demand for low-pressure and low-flow valves, such as poppet valves and diaphragm valves, is increasing due to their wear resistance and spring return features. Solenoid valve design innovations, including pressure relief valves and manual override, further expand the market's scope.
The solenoid valves industry research report provides comprehensive data (region-wise segment analysis), with forecasts and estimates in "USD million" for the period 2025-2029, as well as historical data from 2019-2023 for the following segments.
The Two-way valves segment is estimated to witness significant growth during the forecast period. In the realm of industrial automation, solenoid valves, specifically pneumatic and electromagnetic ones, continue to play a pivotal role due to their versatility and efficiency. These valves cater to various applications, from on-off control in water treatment and compressed air systems to intricate functions in fuel supply and process control in the food industry. Two-way solenoid valves, the most common configuration, offer a simple yet robust solution with a single inlet and outlet port. Their primary function lies in providing binary control, allowing fluids or gases to flow or halt as required. These valves come in both normally closed (NC) and normally open (NO) configurations. Hydraulic valves, for instance, are integral to power generation and industrial automation, while solenoid valves find extensive use in process automation and flow control.
The former keeps the valve closed until the coil is energized, while the latter maintains an open state until energized. Safety certifications, voltage requirements, and fluid compatibility are essential considerations when selecting solenoid valves. Hydraulic solenoid valves and their electromagnetic counterparts undergo rigorous cycle life testing and mounting configurations to ensure optimal performance. Response time, solenoid valve actuation, and solenoid valve coil design also play significant roles in their application. Maintenance procedures, temperature range, and electrical connection are other crucial factors influencing the choice of solenoid valves. Pressure regulating valves, flow control valves, and port size selection further expand their functionality.
Valve sealing and leakage rate are essential aspects of their design, ensuring reliable operation. Three-way and proportional solenoid valves offer more complex control functions, while pressure drop and two-way solenoid valve sizing are essential considerations for efficient system design. Control valves, gate valves, safety valves, pressure relief valves, check valves, ball valves, and butterfly valves are integral components, each with unique applications.
The Two-way valves segment was valued at USD 3.01 billion in 2019 and showed a gradual increase during the forecast period.
The Solenoid Valves Market is witnessing steady growth driven by demand for automation and fluid control. Key products include flow control valve, pressure regulating valve, and electromagnetic valve that cater to diverse industries. Variants like direct acting solenoid, pilot operated solenoid, threeway solenoid valve, normally open valve, and normally closed valve offer tailored solutions. Applications range from hydraulic solenoid valve used in industrial machinery to pneumatic solenoid valve in automotive systems. Precision control is enhanced by proportional solenoid valve, while basic operations utilize onoff solenoid valve. The choice of valve body material be it stainless steel, brass, or engineered plastics impacts durability and compatibility. Water systems, chemical processing, and regulatory compliance are other sectors where thermostatic control valves are in high demand.
The Solenoid Valves Market is rapidly expanding due to rising demand for precision control across industries. Key valve types such as diaphragm valve and poppet valve serve varied flow dynamics. A comprehensive valve selection guide helps engineers choose application specific valves tailored for distinct environments. The growing need for efficiency has fueled innovations in highpressure valves for industrial operations and lowpressure valves for delicate systems. Safety remains paramount, making pressure relief valve a crucial component. Moreover, advanced flow control valve offer optimized automation and fluid regulation. Valves for infrastructure projects, advanced valve actuation technologies, valves supply chain, valves for energy efficiency, valves for industrial automation, and valves for environmental compliance will fuel growth through 2029.
APAC is estimated to contribute 41% to the growth of the global market during the forecast period. Technavio's analysts have elaborately explained the regional trends and drivers that shape the market during the forecast period.
The solenoid valve market in the Asia-Pacific (APAC) region is experiencing significant growth, driven by the region's status as a global manufacturing hub and rapid industrialization. Countries like China, Japan, South Korea, India, and Southeast Asian nations are fueling demand across various sectors, including electronics, automotive, factory automation, and chemical processing. Companies such as SMC Corporation and CKD Corporation, based in the region, are leading the market with extensive product offerings, scalability, and competitive pricing for high-volume applications. Key factors contributing to this growth include continued investment in infrastructure, the burgeoning electric vehicle (EV) and battery manufacturing industries, and the expansion of semiconductor fabrication facilities.
Solenoid valves come in various types, including pneumatic, electromagnetic, on-off, hydraulic, and safety certified. Voltage requirements, fluid compatibility, and cycle life testing are crucial considerations for their selection. Mounting configurations, response time, and solenoid valve actuation are essential factors in their application. Solenoid valve coils, direct acting, and pilot operated solenoids, leakage rates, valve body materials, flow rate control, ip ratings, duty cycle operation, maintenance procedures, temperature ranges, electrical connections, and various valve types like normally open, pressure regulating, flow control, three-way, proportional, and two-way solenoids, all play a role in their functionality and suitability for diverse industries.
Solenoid valve sizing is a critical aspect of their integration into systems.
Our researchers analyzed the data with 2024 as the base year, along with the key drivers, trends, and challenges. A holistic analysis of drivers will help companies refine their marketing strategies to gain a competitive advantage.
The solenoid valves market forecasting report includes the adoption lifecycle of the market, covering from the innovator's stage to the laggard's stage. It focuses on adoption rates in different regions based on penetration. Furthermore, the solenoid valves market report also includes key purchase criteria and drivers of price sensitivity to help companies evaluate and develop their market growth analysis strategies.
Customer Landscape
Companies are implementing various strategies, such as strategic alliances, solenoid valves market forecast, partnerships, mergers and acquisitions, geographical expansion, and product/service launches, to enhance their presence in the industry.
Airtac International Group - The company specializes in providing solenoid valves, including the 2V, 3V, and 4V series, for pneumatic automation applications.
The industry research and growth report includes detailed analyses of the competitive landscape of the market and information about key companies, including:
Qualitative and quantitative analysis of companies has been conducted to help clients understand the wider business environment as well as the strengths and weaknesses of key industry players. Data is qualitatively analyzed to categorize companies as pure play, category-focused, industry-focused, and diversified; it is quantitatively analyzed to categorize companies as dominant, leading, strong, tentative, and weak.
The solenoid valve market continues to evolve, driven by advancements in technology and expanding applications across various sectors. Pneumatic and electromagnetic solenoid valves, including on-off, direct acting, and pilot operated variants, are integral components in industries such as manufacturing, automotive, and oil and gas. Safety certifications, voltage requirements, and fluid compatibility are crucial considerations in solenoid valve selection. For instance, a leading manufacturer increased sales by 15% by offering hydraulic solenoid valves with UL and CE certifications, catering to the stringent safety standards in the European market. Cycle life testing, mounting configurations, response time, and solenoid valve actuation are essential factors influencing market dynamics.
Hydraulic solenoid valves, for example, offer faster response times and longer cycle life compared to their pneumatic counterparts, making them a preferred choice in high-performance applications. Industry growth is expected to remain robust, with a projected CAGR of 5% over the next five years. Factors contributing to this growth include the increasing demand for flow control valves, pressure regulating valves, and three-way solenoid valves in various industries. Solenoid valve coils, leakage rates, valve body materials, and flow rate control are other critical aspects impacting market trends. IP ratings, duty cycle operation, maintenance procedures, temperature range, electrical connection, and port size selection are essential considerations for end-users.
Normally open and normally closed valves, proportional solenoid valves, pressure drop, and two-way solenoid valves are additional product categories shaping the market landscape. As technology advances, solenoid valves are becoming more versatile, with applications ranging from simple on-off functions to complex flow control systems.
Dive into Technavio's robust research methodology, blending expert interviews, extensive data synthesis, and validated models for unparalleled Solenoid Valves Market insights. See full methodology.
|
Market Scope |
|
|
Report Coverage |
Details |
|
Page number |
262 |
|
Base year |
2024 |
|
Historic period |
2019-2023 |
|
Forecast period |
2025-2029 |
|
Growth momentum & CAGR |
Accelerate at a CAGR of 4.7% |
|
Market growth 2025-2029 |
USD 1.43 billion |
|
Market structure |
Fragmented |
|
YoY growth 2024-2025(%) |
4.5 |
|
Key countries |
US, China, Japan, India, Germany, South Korea, UK, Canada, Brazil, and France |
|
Competitive landscape |
Leading Companies, Market Positioning of Companies, Competitive Strategies, and Industry Risks |
We can help! Our analysts can customize this solenoid valves market research report to meet your requirements.
1 Executive Summary
2 Technavio Analysis
3 Market Landscape
4 Market Sizing
5 Historic Market Size
6 Five Forces Analysis
7 Market Segmentation by Type
8 Market Segmentation by Material
9 Market Segmentation by Product Type
10 Market Segmentation by Sector
11 Customer Landscape
12 Geographic Landscape
13 Drivers, Challenges, and Opportunity/Restraints
14 Competitive Landscape
15 Competitive Analysis
16 Appendix
Research Framework
Technavio presents a detailed picture of the market by way of study, synthesis, and summation of data from multiple sources. The analysts have presented the various facets of the market with a particular focus on identifying the key industry influencers. The data thus presented is comprehensive, reliable, and the result of extensive research, both primary and secondary.
INFORMATION SOURCES
Primary sources
Secondary sources
DATA ANALYSIS
Data Synthesis
Data Validation
REPORT WRITING
Qualitative
Quantitative
Get the report (PDF) sent to your email within minutes.
Complimentary full Excel data with your report purchase.
Get lifetime access to our
Technavio Insights
Quick Report Overview:
Quick Report Overview:
Cookie Policy
The Site uses cookies to record users' preferences in relation to the functionality of accessibility. We, our Affiliates, and our Vendors may store and access cookies on a device, and process personal data including unique identifiers sent by a device, to personalise content, tailor, and report on advertising and to analyse our traffic. By clicking “I’m fine with this”, you are allowing the use of these cookies. Please refer to the help guide of your browser for further information on cookies, including how to disable them. Review our Privacy & Cookie Notice.
